Features:
- 2 Assignable Wiegand Inputs
- 500 Pin Code Slots
- 500 Prox Tag Slots (can be linked to Pin Code for extra security)
- 500 Radio Slots (requires RX-16 MF349 Receiver)
- 2 Relay Outputs 10Amp rated N/O, N/C Contacts (programmable reset time 0-255 seconds)
- 2 Request to Exit Inputs (linked to output 1 & 2)
- 2 +12volt Fused Outputs
- Software Package Available (requires USB D-Link Cable) note database can be transferred from v1 AC2, to v2 AC2-W
- Programming Terminal Keypad Available (KP-ICON-OEM-P v2.04 or above)
- Optional Plug-On Power Supply Battery Backup Module (ESX-PSU2)
Supported Access Keypads: - PW-WIEGAND (Prox and KP 7-wire System 50m Max. Cable Run) - PW-WIEGAND-NK (Prox Only, 7-wire System 50m Max. Cable Run) - CPT-DH16A-10T-W (Metal Prox and KP7-wire System 50m Max. Cable Run) - CPT-DH16A-12DT-W (Metal Prox and KP7-wire System 50m Max. Cable Run) - PW READER-AAPNZ (4-wire System, AC2-W must be set to KP Bus mode, DIP1 ON, both Wiegand input must then be the same Keypad)
Specs:
- Operating Voltage = 10-15 Volts DC
- Standby Current = 60mA (plus Keypads 70mA each)
- Operating Current = 100mA (plus Keypads 70mA each)
- Dimensions = 105 x 93 x 34mm
- 2 Assignable Wiegand Inputs
- 500 Pin Code Slots
- 500 Prox Tag Slots (can be linked to Pin Code for extra security)
- 500 Radio Slots (requires RX-16 MF349 Receiver)
- 2 Relay Outputs 10Amp rated N/O, N/C Contacts (programmable reset time 0-255 seconds)
- 2 Request to Exit Inputs (linked to output 1 & 2)
- 2 +12volt Fused Outputs
- Software Package Available (requires USB D-Link Cable) note database can be transferred from v1 AC2, to v2 AC2-W
- Programming Terminal Keypad Available (KP-ICON-OEM-P v2.04 or above)
- Optional Plug-On Power Supply Battery Backup Module (ESX-PSU2)
Supported Access Keypads:
- PW-WIEGAND (Prox and KP 7-wire System 50m Max. Cable Run)
- PW-WIEGAND-NK (Prox Only, 7-wire System 50m Max. Cable Run)
- CPT-DH16A-10T-W (Metal Prox and KP7-wire System 50m Max. Cable Run)
- CPT-DH16A-12DT-W (Metal Prox and KP7-wire System 50m Max. Cable Run)
- PW READER-AAPNZ (4-wire System, AC2-W must be set to KP Bus mode, DIP1 ON, both Wiegand input must then be the same Keypad)
Specs:
- Operating Voltage = 10-15 Volts DC
- Standby Current = 60mA (plus Keypads 70mA each)
- Operating Current = 100mA (plus Keypads 70mA each)
- Dimensions = 105 x 93 x 34mm